Posts

Sea Tour 15 by Prasad Bhatla (NZ)

PrasadA

Prasad, from Auckland, New Zealand dislays his Sea Tour 15-R ( stretched to 16 feet).

Sea Tour 17-R by Tom Scheckel (US)

Buckinghams

Tom, from Chicago, Illinois built his Sea Tour 17-R folding kayak over the winter and has been enjoying it since spring. Tom reports…It tracks great, is lightweight and very quick. I love it!…” The kayak incorporates “arched” inwales, aluminum stem plates, cedar plank flooring, and a PVC skin.

Tom plays drums in the 60’s group “The Buckinghams” so the insignia on his kayak is the spindle from a 45 record.

Sea Rider by Walter Berazategui (AR)

post-Cordoba2

Emilio Martinez and Walter Berazategui from Argentina paddle their clear vinyl skin Sea Rider’s.

Nikumi by Carlos and Emilio Martinez (AR)

post-Cordoba3

Carlos and Emilio Martinez of Cordoba, Argentina recently completed this wood frame Nikumi.

Sea Bee 13 by Jack Gilman (US)

post-JackSeaBee

Jack paddles his new Sea Bee on the Hudson River near Yonkers, New York.

Sea Tour 15EXP by Romain Berard (CN)

post-RomainEXP1

Romain Berard from Beijing, China has completed a Sea Tour 15EXP. The multi-chine wood frame is skinned with PVC

post-RomainEXP2

Romain’s Sea Tour 15EXP frame before skinning.

Sea Bee 13 by Falk Bock (US)

post-Falk1

Falk, from Tacoma, Washington built a Sea Bee 13 in under 6 hours as part of a boatbuilding / racing competition. Falk describes the competition …

” The local Maritime Festival organizes a “Quick and Dirty Boatbuilding Competition” every year, which I’ve been entering. The idea is that you get a pile of materials (plywood and 2x4s) and you have 6 hours to build a boat, which you then race around a short course on the bay.” …..Well, the boatbuilding competition has come and gone, and this year we actually won the race! Thanks for suggesting the Sea Bee, that is one sweet little boat! The build wasn’t much harder than the Yarra ( last years race) – there are more strakes, but fewer frames, so the number of joints is about the same. Very nice handling, nice lines, I’m just all-out impressed by that boat. Total build time for three people: five-and-a-half hours. I took the “Barely There” out for a paddle yesterday, and what impressed me the most was the balance – in ten knots of wind, there was zero weathervaning. It tracked absolutely straight.

The technical stuff: It’s 6 mil vinyl over poplar stringers on 1/2″ CDX plywood frames, held together with #6 drywall screws and 1/2″ staples.”

post-Falk2

The Sea Bee 13 under construction during the competition.